If there’s a moisture drawback, solve that before you lay new flooring. All ground cover requires a base that’s structurally sound, clear, level (to 1/4" per 10’ span) and dry (moisture content of the subfloor should not exceed thirteen percent). Concrete makes a very good base, assuming the floor is easy and incorporates an excellent vapor barrier. Untempered hardboard, plywood, and particleboard additionally make an excellent base for flooring. Use either 1/4"- or 3/8"-thick sheets
> Underlayment wants a 1/32" hole on the edges and the ends to permit for growth. No matter which type of flooring you choose, give the material a few days to succeed in the moisture content of the room where will probably be installed. Remove tiles from their packaging and store them in the room where they will be installed for at the very least forty eight hours prior to installation. Wood flooring, sheet vinyl with resilient backing, and carpeting might be put in instantly over an present hardwood floor, assuming any voids have been stuffed and the floor isn’t free
>Seamless flooring, consisting of resin chips mixed with a urethane binder, could be utilized over any stable base, together with old floor tile. You possibly can set up laminated wooden flooring over ceramic, https://www.vapeuse.com/black-market-bo-one-ultra-portable-pod-system wood or resilient flooring, so long because the floor is firm and dry. You'll be able to then install hardwood strip flooring straight over the sleepers. On one giant site we positioned over 90 such pipes across the perimeter of a gas station in sooner or later